Fersa 32020XF tapered roller bearings

Dimension A2:0.5938 in; Dimension A1:1.2813 in; Distance J:3.2500 in; Height T:1.6563 in; Dimension DA:3.6875 in; Basic Static Radial Load Rating Co:2520 lbf; Shaft Diameter D:1 1/4 in; Basic Dynamic Radial Load Rating:4380 lbf; Weight W:2.65 lb; Dimension L:4.2500 in;

ra max.:1.5 mm; F:66 mm; Limiting value e:0.3; D1 ≈:86.25 mm; B:25 mm; Da max.:91.4 mm; Fatigue load limit Pu:15.3 kN; Limiting speed:13000 r/min; db min.:73 mm; d:55 mm;

d:40.000 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:8000 rpm; D:110.0000 mm; Basic Dynamic Radial Load Rating C:63700 N; Accessories:Seal & Snap-Ring; Basic Static Radial Load Rating Co:36500 N; B:27.00 mm; Sealed Speed Rating n3:4400 rpm; Grease Speed Rating Open/Shielded n1:67

Basic Dynamic Radial Load Rating C:28100 N; Basic Static Radial Load Rating Co:16000 N; Accessories:Two Seals & Snap-Rin; Grease Speed Rating n1:9000 rpm; Sealed Speed Rating n3:6300 rpm; D:72.0000 mm; d:30.000 mm; Oil Speed Rating Open/Shielded n2:11000 rpm; B:19.00 mm; Grease Speed Rating Open/Shi

Dynamic (Cr):9 mm; Oil:368.160 kN; with cylindrical bore:750 min-1; rs (min):5 mm; D:460 mm; with tapered bore:950 min-1; Static (Cor):16.7 mm; B:146 mm; Grease:4470 kN; d:280 mm;

Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:300000 N; Oil Speed Rating n2:3000 rpm; d:130.000 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:225000 N; Grease Speed Rating n1:2600 rpm; D:200.0000 mm; B:66.00 mm;

r, r1,2 min.:0.3 mm; Mass inner ring:0.015 kg; B:16 mm; d:20 mm; F:24 mm;

J6:960 mm; da:360 mm; Appropriate attachment bolt, size G:36 mm; H:715 mm; P55°:8000 kN; Locating ring:2 x FRB 10/620; s:30 mm; End cover:ETS 76; d2:507 mm; Bearing (basic designation):23176 K;

l1 min.:95 mm; l2 max.:219 mm; Basic static load rating C0:200 kN; dk:60 mm; Mass rod end:2.55 kg; r1 min.:0.6 mm; Material constant KM:330; l7 min.:50 mm; G:M 45x3; C1 max.:28 mm;

P90°:140 kN; Appropriate attachment bolt size G:1 in; Ca:95.809 mm; h:49.212 mm; Initial grease fill:878.85 g; Housing:SAF 040 KA; R1:115.888 mm; R2:37.306 mm; Adapter sleeve assembly:SNW 3040x7.1/4; Cap bolt, SAE grade:5;

Eye bolt:2 x 3/8-16 UNC; A2:215.9 mm; Stabilizing ring:SR-0-24; L:539.75 mm; Mass pillow block:93.5 kg; R2:39.688 mm; H2:63.5 mm; PG:1/4 NPT; PosiTrac Plus contact element:2 x B10724-113; Initial grease fill:623.7 g;

F:16 mm; Mass inner ring:0.0085 kg; d:12 mm; r, r1,2 min.:0.3 mm; B:13 mm;

Dynamic (Cr):9.534 kN; D:40 mm; Weight:0.083 kg; da:21 min; d:17 mm; Pu:0.215 kN; Bearing designation:62203  ; B:16 mm; Da:36 max; Static (Cor):4.734 kN;

Basic dynamic load rating C:4.84 kN; Fw:8 mm; Mass needle roller and cage assembly:0.002 kg; Fatigue load limit Pu:0.54 kN; Designation associated G design radial shaft seal with a low cross-sectional height:G 8x12x3; Limiting speed:34000 r/min; Ew:12 mm; U:10 mm; Reference speed:30000 r/min; Basic

Mass inner ring:0.51 kg; F:110 mm; B:40 mm; r, r1,2 min.:1.1 mm; d:100 mm;